Comet P40 Soft Wash Skids, Pumps & Parts

The Comet P40 is a three-diaphragm, self-priming soft wash pump with chemical-resistant wet parts, rated up to 300 PSI. It runs at low pressure and high volume, so pressure washing and soft washing contractors use it to apply SH and surfactant mixes to roofs, siding and other surfaces without blasting them. This page collects our P40 skids, bare pumps and genuine Comet parts and rebuild kits.

Comet P40 soft wash skids

The Comet P40 Soft-Wash Skid delivers 12 GPM at up to 300 PSI. Choose a Honda GX200 pull start, Honda electric start, or CRX225 electric start. The skid weighs about 80 lb (about 120 lb crated for freight). It is 49-state compliant and cannot be shipped to California. If you want to run without a gas engine, the VIPower Batch Bandit pairs a Comet P40 with a brushless DC motor and an included 56V LiFePO4 battery, for up to 11.4 GPM at about 290–300 PSI. To compare P40 skids with AR45, AR60 and high-low systems, see Soft Wash Systems: Skid, Truck & Trailer Mount.

Bare P40 pump and gearbox

Building a rig or replacing a worn pump? The Comet P40 bare pump and gearbox is rated at 14.5 GPM and 300 PSI and comes with a pressure regulator and a 3/4" solid-shaft gearbox.

P40 rebuild kits and parts: new vs. older design

Comet has built the P40 in an older design and a newer design, and several parts differ between them. The newer design uses a molded one-piece collector and the Comet GCP 20 regulator (42001-00838). Older-design pumps use the 1204.0712.00 regulator group body. The collector retrofit kit (10002-14670KIT) converts a gas-engine P40 to the new-style collector.

For routine service, the Ordinary Maintenance Kit (5026.0419.00) includes 3 diaphragms, 6 check valve assemblies and 6 O-rings. Diaphragms and valves wear faster in bleach service, so many crews rebuild on a schedule instead of waiting for a failure. We also stock individual O-rings, elbows, manifolds, wing nuts, spacers, valves and head caps. Many part titles include the Comet part number and the breakdown position number (for example, #59 or #76), so you can match them to your pump.

Running a P40 with a proportioner? The P40UK upgrade kit adds a check valve between the pump outlet and the reel and moves the bypass to 3/4" crushproof hose. Comet recommends both changes to help relieve the manifold pressure spikes that can crack P40 parts.

Not sure which part you need?

Compare your pump with the Comet P40 breakdown sheet and check the part number and position before you order. If you are still not sure whether you have the older or newer design, call us at 352-571-4654 and we will help you find the right part.

Shipping and pickup

We ship from Florida. Qualifying orders of $125 or more get free standard shipping to the lower 48 (see our Shipping Policy for exclusions such as LTL freight and special-order items). Local contractors can order online and pick up 24/7 at our Wildwood locker: Just Wash Stuff, 5626 C Thomas Rd, Ste 709, Wildwood, FL 34785.

Comet P40 FAQ

Is the Comet P40 a pressure washer?

No. The P40 is a low-pressure diaphragm pump for soft washing, rated up to 300 PSI. It is not a high-pressure washer.

How do I tell if my P40 is the older or newer design?

The newer design uses a molded one-piece collector and the GCP 20 regulator (42001-00838). Compare your pump with the Comet breakdown sheet, or call us at 352-571-4654.

What is in the P40 Ordinary Maintenance Kit?

Comet kit 5026.0419.00 includes 3 diaphragms, 6 check valve assemblies and 6 O-rings.

Can I upgrade an older P40 to the new collector?

For gas-engine P40 pumps, the Comet 10002-14670KIT retrofit kit converts the pump to the new-style one-piece collector. Collector O-rings are not included.

Can you ship a P40 skid to California?

No. The Comet P40 skid is 49-state compliant and is not for sale in California.

36 products